ASIO4ALL 中国官方主页

Windows ASIO 驱动程序

en_US English
en_US English

同步调整

由于 ASIO4ALL 对底层硬件/驱动架构的了解不够，它只能猜测所涉及的实际延迟。 使用这些滑块，您可以补偿 ASIO4ALL 未知的延迟，以便音序器软件中的录音与其他录音正确对齐。

注意：在多设备设置中，将使用所有设备中最大的对应值。 所以如果不同的设备有不同的固有延迟，一些设备会有不准确的音频放置！

  • 入门

    Getting Started

    Setting up your audio software In order to make use of ASIO4ALL, you need to configure your audio software accordingly. How you would do this depends on your particular software application. Generally, you would always enter the audio configuration menu and select ASIO -> ASIO4ALL v2. There now should be a button to launch the… 更多

  • 基本配置

    Basic configuration

    WDM Device List This is the list of audio devices found in your system. Highlight the device that you want to make changes to. Note: All parameter changes always only apply to the device currently highlighted! Activate the device you want to use by clicking on the button next to the device name! In the… 更多

  • 高级配置

    Advanced configuration

    Once the control panel has been switched to advanced mode, things begin to look a little more complicated. The device list is now expandable and you can enable more than one item at a time. Device list items explained: Devices are independent hardware units most of the time. It is easy to understand the concept… 更多